IBM 8672-26x Manual page 16

v Legato Backup Agent
4
IBM Eserver xSeries Appliances: Installation Guide for xSeries Hosting Appliance
IntelliStation workstations, and ThinkPad notebooks, as well as non-IBM Intel
processor-based systems. It automates tasks such as taking inventory,
monitoring, and alerting, and puts system health information at your fingertips.
The Director agent is pre installed on your appliance. If you are using IBM
Director, the appliance should appear in your management console.
For performance reasons, if you are not using IBM Director in your enterprise,
you should disable the IBM Director agent installed on your appliance.
To disable the agent:
1. Telnet to the appliance.
2. Log in as root.
3. From the session prompt, run the following script:
/opt/CSM/scripts/twgenable.pl
You can re enable the IBM Director appliance agent by doing the following:
1. Telnet to the appliance.
2. Log in as root.
3. From the session prompt, run the following script:
/opt/CSM/scripts/twgenable.pl
For more information on IBM Director, visit
http://www.pc.ibm.com/ww/eserver/xseries/systems_management/nfdir.html.
A Legato backup agent is preinstalled on the xSeries Hosting Appliance. If you
are already using Legato as part of your system backup strategy, you do not
need to install and configure a Legato backup agent on the xSeries Hosting
Appliance. However, you must supply your own license. A Legato client license
is not provided with the appliance.
®