Table of Contents
Advertisement
20. Slide the carriage bolt to the end of the slot in the lower pulley assembly using a 17mm wrench.
21. Install screws and washers securing the lower pulley assembly to the tower frame using an 8mm Allen wrench.
Item
1
Carriage Bolt, M10 x 1.5, 50mm
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2
3
4
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Page 19 of 38
Description
Description
Cable
Lower Pulley Assembly
Screw, M10 x 1.5, 25mm
Washer, Flat 3/8"
Qty.
1
Qty.
1
1
4
4
Advertisement
Table of Contents
