Usb-In Mode; Installing The Usb Driver For Windows 98 - Vivitar DVR-390H User Manual

USB-IN MODE

By using the USB-IN function, you can transfer files between your DVR-390H and computer.
1. Turn on your DVR-390H and computer.
2. Connect one end of the USB cable to an available USB port on your
computer.
Please install the USB driver before connecting the USB cable to
you computer. (For detailed information, refer to the section "Install
the USB Driver for Windows 98" below.)
3. Connect the other end of the USB cable to the USB port on the
DVR-390H.
4. Use the Up/Down/Left/Right keys to select USB-IN mode, and then
press the Ok key to activate the USB-IN function.
5. Now you can transfer files between your DVR-390H and computer.
For further details, refer to section "Transferring Files Between Your
DVR-390H and Computer" in the following page.

Installing the USB Driver for Windows 98

Windows 98 computers
The USB driver on the CD-ROM is exclusively for computers running
Windows 98 Second Edition. Installing the USB driver on computers
running Windows 2000/ME/XP is neither necessary, nor recommended.
1. Insert the CD-ROM that came with the DVR-390H into your CD-
ROM drive. The welcome screen appears.
2. Click "Install USB Driver". Follow the onscreen instructions to
complete the installation. After the USB driver has been installed,
restart your computer.
40