Displaying Image Information; Playing Back Videos And Images On A Tv Monitor - Vivitar DVR-390H User Manual

Displaying Image Information

You may view detailed image information by pressing the
button when playing back an image.

Playing Back Videos and Images on a TV Monitor

You can play back your videos and images on a TV screen or digital projector. Before connecting to any video
device, however, make sure to select, on the DVR-390H, the video broadcast standard (NTSC or PAL) which
matches the video broadcast standard of the video equipment you are going to connect to the media player. It is
also recommended that you use an AC power adapter while viewing your images and video files on a TV monitor.
1. Place the DVR-390H in the cradle.
2. Plug one end of the AV cable into the AV-OUT jack of the cradle.
3. Connect the other end to the Audio and Video input jacks on your TV
Monitor. It is important to note that the yellow RCA jack is the video
signal and the other RCA jacks (usually red and black) are audio
(left and right channels).
4. Turn on your TV and the DVR-390H.
5. Command the DVR-390H to play back still images or videos, as
desired, as discussed in the previous sections.
The method of playback operation is the same as playing back
still images and video clips on the media player itself.
Connecting the DVR-390H to a VCR or DVD recorder is similar.
28
Display