Capturing Still Images Using The Camera Module (Image Rec Mode) - Vivitar DVR-390H User Manual

Capturing still images using the Camera Module (Image Rec Mode)

After connecting the camera module to your DVR-390H you may capture images anytime, anywhere. In this
mode your DVR-390H may be used as a three megapixel digital camera. Your images will be stored to the
internal hard drive, or memory card, if present. Your images will be saved to memory in the common JPG
format for play back at a later time.
1. Turn on your DVR-390H.
2. Use the Up/Down/Left/Right keys to select IMAGE REC mode. Press the Ok key to enter that mode.
3. Compose your shot on the LCD monitor.
For detailed information on how to use digital zoom, please refer to section in this manual titled "Using
the Digital Zoom".
4. Fully press the Shutter button to capture an image.
37