Protecting Videos And Images - Vivitar DVR-390H User Manual

Protecting Videos and Images

You can protect your video clips and images from accidental deletion by selecting the Protect function in the
Video or Image Playback modes. Follow these steps to protect an image or video.
1. Turn on your DVR-390H.
2. Use the Up/Down/Left/Right keys to select Video or Still-Image
Playback mode. Press the Ok key to enter that playback mode.
3. Press the Menu button to open the PLAY menu.
4. Select Protect by using the Up/Down keys.
5. Use the Right key to enter Protect submenu.
6. Use the Up/Down keys to select "One image" (or "All images"),
and then press the Right key to enter its submenu.
To protect all images, select "All images" in this step.
7. Select Lock by using the Up/Down keys, and then press Ok.
Once the video clip/image is protected, the
will be displayed on each protected video and image.
Canceling protection
To cancel protection for an image or video clip, display the image or
video for which you wish to remove the protection.
1. Perform the above steps 1~6..
2. Select Unlock using the Up/Down keys. Press the Ok key to confirm.
Protection icon
29