Inserting And Removing An Sd Memory Card (Optional Accessory) - Vivitar DVR-390H User Manual

Inserting and Removing an SD Memory Card (Optional Accessory)

The DVR-390H comes with 20 GB of internal memory, allowing you to store a considerable number of
images, videos, and audio files. You may expand the memory capacity and enjoy the convenience of added
data portability by using an optional SD (Secure Digital) memory card. This allows you to store additional files
and share them easily with other electronic devices you may already own.
Inserting an SD memory card
1. Always make sure the DVR-390H is turned off before inserting or
removing a memory card.
2. Insert an SD memory card in the correct orientation as shown.
Insert an SD memory card (contact pins first) with the pin-side of
the SD card facing the LCD display side of the DVR-390H. Insert
the card as far as it can go. You will hear and feel it click into place.
Note:
When an SD memory card is inserted, the SD memory card has the first
priority. All data will be saved or read only to/from the SD memory card.
Removing an SD memory card
Make sure the DVR-390H is turned off. Press lightly on the edge of the
memory card and it will eject.
Note:
To prevent valuable data from being accidentally erased from an SD memory
card you can slide the write protect tab (on the side of the SD memory card)
to "LOCK".
To save, edit, or erase data on an SD memory card, you must unlock the
card. You will not be able to store data (images, videos, etc) on a locked
(protected) memory card.
18