Docking Cradle; Turning The Power On/Off - Vivitar DVR-390H User Manual

Docking Cradle

With the docking cradle, you can position your DVR-390H and play back your images and video clips on your
desktop. You may also use the cradle or connect to other media devices to play back (output to a TV monitor
or another recorder recording device, for example) or record (input from a video source such as a DVD player,
for example). In conjunction with an AC adapter the cradle will facilitate the charging of the DVR-390H battery.
1. Position media player on the cradle.
2. Match the docking connectors and carefully
insert the media player until it fits in place.

Turning the Power On/Off

Load the battery or connect the AC power adapter to your DVR-390H.
Press the Power button to turn on your DVR-390H.
To turn off your DVR-390H, press again the Power button and hold
about 2 seconds.
You can also select POWER OFF mode to turn off your DVR-390H.
Note:
The power is turned off automatically when the DVR-390H has not been
operated for a defined period time. To resume the operation condition, turn
the power on again. Refer to section in this manual titled "Power off" in the
System Menu for further details.
Whenever the DVR-390H is turned on with the camera module present, it
may take several additional seconds to charge the flash capacitor.
20