Attaching And Removing The Camera Module (Optional Accessory) - Vivitar DVR-390H User Manual

Attaching and Removing the Camera Module (Optional Accessory)

You can capture an image or record video clips by using the camera module.
Note:
The DVR-390H must be powered off before attaching or removing the camera module, otherwise, the
DVR-390H will automatically shut down.
Attaching the Camera Module
First, note the six small guide rails on the player body and corresponding
notches in the camera module swivel connector.
1. Insert the lower corner of camera module swivel connector into the
camera receptacle on the media player.
2. Note how the release tab (slide button) on the player body begins to
retract.
3. Seat the camera fully into the player receptacle.
4. Slide the camera module upwards slightly until the release tab clicks
and returns to its locked position.
Removing the Camera Moudle
1. Slide the camera release tab to the left end and hold it there.
2. Push the camera module downward slightly, and then remove the camera module from the media player body.
19