Setting The Date And Time - Vivitar DVR-390H User Manual

Setting the Date and Time

The date and time setting screen will automatically appear if/when:
The DVR-390H is turned on for the first time.
The DVR-390H is turned on after leaving the DVR-390H without the battery for an extended period of time.
(Typically, more than two hours.)
Changing the date and time setting
1. Turn on your DVR-390H.
2. Use the Up/Down/Left/Right keys to select any mode. Press the
Ok key to enter that mode.
3. Press the Menu button.
The Menu screen is displayed.
4. Move to Custom menu by using the Left/Right keys.
5. Select Date setup with the Up/Down keys, and use the Right key
to enter its setup menu.
The Date setup screen is displayed.
6. Select the item's field with the Left/Right keys and adjust the value
for the date and time with the Up/Down keys.
7. After confirming all settings are correct, press the Ok key.
22