Lifting The Sewing Feet - Duerkopp Adler 867-M PREMIUM Operating Instructions Manual

44
Information
When the largest thread quantity is required, the thread tension
spring must be pulled approx. 0.5 mm up from its lower end
position. This occurs when the needle thread loop passes the
maximum hook diameter.

4.10 Lifting the sewing feet

Fig. 25: Lifting the sewing feet
(1) - Pedal
To lift the sewing feet:
1. Press the pedal (1) halfway back.
 The machine stops and lifts the sewing feet.
The sewing feet remain up as long as the pedal is pressed
halfway back.
or
1. Press the pedal (1) fully back.
 The thread cutter is activated, and the sewing feet are
raised.
Operating Instructions 867-M PREMIUM - 02.0 - 05/2017
Operation
①