Duerkopp Adler 867-M PREMIUM Operating Instructions Manual page 79

Programming
Operating Instructions 867-M PREMIUM - 02.0 - 05/2017
Setting: Stitch length (Stitchlen.)
The stitch length changes slightly depending on the speed. For this
reason, the stitch length can be adjusted at different speeds by
the software.
linear Stitchlen.
Value range -50 – 50 [%]
Min. speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Max. speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
2.OnOff Min. speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
2.On Min. speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Maximum stitch length variation
reached at the upper speed limit.
Speed at which the increase/
reduction of stitch length should
start.
Speed up to which the increase/
reduction of stitch length should
occur.
Speed from which the 2
length should be used.
Speed from which the 2
length should be used.
nd
stitch
nd
stitch
77