Cooling Connection Adapter - Siemens SIMOTICS T-1FW6 Configuration Manual

Built-in torque motors

Hide thumbs Also See for SIMOTICS T-1FW6:

Table of Contents

Configuration

6.4 Installation

Siemens does not accept any warranty for the properties/features of third-party products.

Cooling connection adapter

Mounting the cooler connection adapter for motors with integrated cooling

The components required for connecting the cooler for motors with integrated cooling can

usually be mounted with standard tools.

Using a cooling connection adapter (option), you can connect the main cooler and precision

cooler in parallel to a cooling unit. The cooling connection adapter is not mounted for motors

which are not equipped with a precision cooler.

When mounting the cooling connection adapter using the 3 cylinder head screws, the

cooling ducts are sealed using O-rings. More information is provided in the following

diagrams. The cylinderhead screws and O-rings are supplied with the cooling connection

1FW6 Built-in torque motors

Configuration Manual, 09/2022, A5E52220645B AA