Introduction
1.3 SIMOTICS documentation
1.2.2
Target group
Description
This Configuration Manual addresses:
• Planning engineers
• Design engineers
• Mechanical design engineers
1.2.3
Standard scope
Description
This documentation describes the functionality of the standard scope. This scope may differ
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modifications they make to the
product themselves.
1.2.4
Websites of third-party companies
Description
This document may contain hyperlinks to third-party websites. Siemens is not responsible for
and shall not be liable for these websites and their content. Siemens has no control over the
information which appears on these websites and is not responsible for the content and
information provided there. The user bears the risk for their use.
1.3
SIMOTICS documentation
Description
Comprehensive documentation on SIMOTICS, SIMOGEAR and on the SINAMICS converter family
are provided in Internet (https://support.industry.siemens.com/cs/ww/en/ps/13204/man).
10
1FW6 Built-in torque motors
Configuration Manual, 09/2022, A5E52220645B AA