Getting The Paperport Software User's Guide; Step 3: Checking Out Your Scanner - Visioneer PaperPort OneTouch Installation Manual

4. Plug the power supply cable into the jack on the back of the scanner, then plug the power supply
into a wall outlet.
USB Cable
A progress message appears saying that the scanner has been found. The scanner is now correctly
installed.
Note: If your computer is running Windows XP, you may see messages about using a fast USB 2.0
connection for the scanner. If your computer is not equipped with USB 2.0 ports, you can just
disregard those messages.
5. Click the Finish button.
6. From the CD, install the other software applications.
7. When you have finished installing the other software, remove the CD from your computer and store
it in a safe place.
G P P
ETTING THE APER ORT
The Installation CD also includes your ScanSoft PaperPort User's Guide. This guide provides more
detailed information about the PaperPort software's features. Please see the CD to view or print the guide.
S 3: C O
TEP HECKING
The OneTouch software adds the scanner icon to the Windows taskbar (at the bottom right corner of the
computer screen). If the scanner is properly connected, the scanner icon looks like the one in this figure.
Scanner Icon
If the icon has a red X through it, the scanner is not properly connected. See the next section, "If the
Scanner Is Not Properly Connected," for the steps to fix the problem.
To check the status of the scanner:
1. Right-click the scanner icon.
The shortcut menu appears.
Power supply
S U ' G
OFTWARE SER S
Y S
UT OUR CANNER
S 3: C O Y
TEP HECKING UT
UIDE
S 3
OUR CANNER