Saving A Custom Size - Visioneer PaperPort OneTouch Installation Manual

28 O T S
NE OUCH CANNER
A new Scan Info box for the
area selected on the image.
I G
NSTALLATION UIDE
The area you selected to scan.
4. If the dotted line is not exactly where you want it, put the pointer on the line and drag the mouse.
To use the pointer to drag the line, make sure the pointer button is selected at the top of the
window.
5. To rotate the selected area 90 degrees, click Rotate 90 Degrees.
6. To maintain the selected area's length-to-width relationship (known as the aspect ratio), click
Maintain Aspect.
Note that as you rotate the area or maintain its aspect ratio, the width and height measurements
change to reflect the new orientation of the image.
7. When the settings are what you want, click Scan.
8. If you want to remove the selected area and start over, click Remove on the Scan Info box.
S C S
AVING A USTOM IZE
If you have several items of the same size, such as a group of small photographs, you can create a custom
size and reuse it whenever scanning those items.
To save a custom size setting:
1. Click Add under the list of sizes.
The Add Size dialog box appears.