Creating New Configurations; Adjusting Scan Settings And - Visioneer PaperPort OneTouch Installation Manual

10 O T S
NE OUCH CANNER
I G
NSTALLATION UIDE
3. Click a selection in the Select Configuration list to choose a new scan configuration for the selected
scanner button.
The configurations are preset for the application you select in the application list. If you select
another application, the configurations are for that application.
If you want to select a configuration prior to scanning, click the option, Configure before Scan.
When you press a scanner button, the Scan Manager or Scan Manager Pro dialog box appears first
and you can select a configuration before scanning. See "Using Twain and Scan Manager - for Value
Series Scanners" on page 15 or "Using Twain and Scan Manager Pro - for Performance Series
Scanners" on page 20.
4. Select one of the Format and Page(s) options for the button.
5. Click OK.
Now when you press the scanner button, it scans the image using the new configuration settings and
displays the scanned image in the new destination application.
Note: The Configuration dialog box is also available from the scanner icon on the Windows taskbar.
Click the icon to see the scanner buttons panel. Click a button on the panel with the right mouse
button. (Don't click with the left mouse button because clicking with the left mouse button starts
scanning.) The Configuration dialog box appears.
C N C
REATING EW ONFIGURATIONS
You cannot change settings such as brightness or contrast of the preset configurations. To scan with
settings other than those offered by the preset configurations, you must first create a new configuration.
To create a new configuration click the New button. You can also click Copy to copy a preset
configuration, change its settings, and then save it under a new configuration name.
A S S
DJUSTING CAN ETTINGS AND
When scanning using a configuration that you created yourself, you can adjust that configuration's scan
settings and page settings. For example, if the scanned image is too dark, you can adjust the brightness of
the scan setting.
Note: You cannot change the scan settings or page settings for any of the predefined scan
configurations. You can only adjust settings for scan configurations that you create yourself. See the
section above, "Creating New Configurations".
To adjust the scan settings and page settings:
1. Display the Configuration dialog box.
Click the tab of the button whose options you want to change.
P S
AGE ETTINGS