About The Onetouch Buttons - Visioneer PaperPort OneTouch Installation Manual

6 O T S
NE OUCH CANNER
I G
NSTALLATION UIDE
To scan by pressing a button on the scanner:
1. Place an item to scan on the glass, face down, and align the edge of the item with the arrow marker
at the lower left corner of the glass.
2. Close the lid and press one of the scanner buttons.
The scanner starts scanning the item. Messages just above the Windows taskbar shows the status of
the scanning. During scanning, the scan progress window shows a small copy of the image, as
illustrated by this example:
When the scan is complete, the scanned image appears in the destination software. In this example,
the destination software is the PaperPort Desktop.
A O T
BOUT THE NE OUCH
Note: Your OneTouch scanner may have 3 or 5 OneTouch buttons. The pages below show all 5
OneTouch options, if your scanner has 3 OneTouch buttons, follow the guides for Email, Copy/Print
and Scan only.
The OneTouch buttons are preconfigured for typical scanning tasks. To change the settings for the
buttons, see "About the Configuration Dialog Box" on page 7.
The following table lists the scanner's preconfigured settings:
Button Function
Scan
Email
OCR
Copy/Print
Custom
B
UTTONS
Preconfigured Settings
Scans the item as a color page and displays it in PaperPort
Scans the item as a color photo and attaches it to a new
email message in your email application
Converts the item's text to black and white word processing
text, and displays it in a word processing application
Prints the scanned item in black and white on your printer/
copier at the printer/copier's default resolution
Scans the item as a color photo and displays it in an image
processing application