G Rf Remote Control Instruc�On - Heat & Glo STELLAR 3-SS-20-G Manual

2.4G RF Remote control instruc�on
1). Linking Code Instruc�ons
Power
SET
or
1
Power off 10 seconds and
power on again or short
press "SET" one �me.
Linking failed if light is not blinking slowly, Please follow above steps again.
(Note: Light that have linked can't link again)
2). Unlinking Code Instruc�ons
Power
SET
or
1
Power off 10 seconds and
power on again or short
press "SET" one �me.
Unlinking failed if light is not blinking quickly, Please follow above steps again.
(Note: Light haven't linked that don't need to unlink)
Light
Link / Unlink
2
Short press " I " bu�on
3 �mes within 3 seconds.
Light
Link / Unlink
2
Short press " I " bu�on
5 �mes within 3 seconds.
bu�on
bu�on
⸺ 4 ⸺
Power Light
3
Lights blink 3 �mes
slowly means linking
is done successfully.
Power Light
3
Lights blink 10 �mes
quickly means unlinking
is done successfully.