Resetting The Air Filter Service Indicator; Servicing The Air Cleaner - Toro Reelmaster 5610-D Operator's Manual

Checking the Air Cleaner (continued)
4. If a red band displays in the service indicator,
change the air filter.
5. Squeeze the dust-ejector valve.
6. Close and latch the hood.

Resetting the Air Filter Service Indicator

1. If a red band displays in the service indicator,
press the reset button at the end of the
indicator.
2. Close and latch the hood.

Servicing the Air Cleaner

• Check the whole intake system for leaks, damage, or loose hose clamps. Do not use a
damaged air filter.
• Service the air-cleaner filter only when the service indicator requires it. Changing the air
filter before it is necessary only increases the chance of dirt entering the engine when
you remove the filter.
Make sure that the cover is seated correctly, seals with the air-cleaner body, and the
rubber outlet valve is in a downward position—between the 5 o'clock and 7 o'clock
positions when viewed from the end.
Maintenance: Engine Maintenance
G414762
G414765
IMPORTANT
Page 6–11 3464-493 A