Pre-Maintenance Procedures; Preparing For Maintenance - Toro Reelmaster 5610-D Operator's Manual
Hide thumbs
Also See for Reelmaster 5610-D:
- Operator's manual (124 pages) ,
- Owner's manual (84 pages) ,
- Service manual (662 pages)
Table of Contents
Advertisement
Maintenance Check Item
1.
Check the glow plug and injector nozzles if the engine starts hard, produces excess smoke, or runs rough.
2.
Check with the engine running and the oil at operating temperature.
3.
Immediately after every washing, regardless of the interval listed
Refer to your engine operator's manual for additional maintenance procedures.
Notation for Areas of Concern
Inspection performed by:
Item
Date
1
2
3
4
5
Pre-Maintenance Procedures
Preparing for Maintenance
1. Park the machine on a level surface, disengage the PTO, lower the cutting units, and
engage the parking brake.
2. Shut off the engine, remove the key, wait for all moving parts to stop, and allow the
engine to cool.
Maintenance: Pre-Maintenance Procedures
For the week of:
Mon.
Tues.
IMPORTANT
Information
Page 6–5
Wed.
Thurs.
Fri.
Sat.
Sun.
3464-493 A
Advertisement
Table of Contents
