Table of Contents
Advertisement
15.2 Change basic settings
To access the basic settings, click
1.
Instellingen Preferencespress.
Select the desired basic setting.
2.
→ "Overview of the basic
settings", page 42
Adjust the basic setting:
3.
To change the value, press or
‒
To reset the device to factory
‒
settings, click
press for approx. 3 seconds.
To save the settings, clickInstellingen
4.
Preferences press.
1 6 Device care
D
The device offers cleaning programs
me for simple and intensive device
care.
16.1 Prepare device care
Prepare device for device
care
Prepare the device before device
care.
requirements
¡The drum is empty.
¡The device is in standby mode
stood (standby).
Clean the lint filter.
1.
→
"Cleaning the lint filter", page 35
Pull out the condensation water
2.
container horizontally and empty it.
→ "condensation
ren", page 37
press.
empty container
Prepare the condensation
container for device care
If you drain the device's condensation
water via the drain hose, prepare the
condensation water container before
cleaning the device.
Remove the plug from the top
1.
well.
Insert the plug at the bottom.
2.
Clean the filter in the condensation
3.
water container.
16.2 Call up device maintenance
Requirement:Device care is prepared.
→
"Preparing for device care",
page 43
On
press.
1.
The switch-on process takes a few
seconds.
Equipment carede
43
Advertisement
Table of Contents
