Saving Program Settings; Loading Laundry; Start The Program; Adding Laundry - Bosch WQB246DAFG Instructions For Use And Assembly

deBasic operation
A notice:The program settings are not
permanently saved for the program.
12.4 Save program settings
You can save your individual
program settings as a favorite.
requirements
¡A program is set.
→ "Setting the program", page 33
¡The program settings are
adjusted.
→ "Adjust program settings", page
33
OnFavoritepress for approx. 3
▶
seconds.
To call up the saved program,
clickFavorite press.
A notice:To overwrite the saved
program, repeat the steps.
12.5 Load laundry
A notice:To avoid creasing, pay
attention to the maximum load of
the programs.
→ "Programs", page 29
requirements
¡The laundry is prepared and sorted
ted.
→ "Laundry", page 33
¡The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Make sure no laundry is caught in
the door.
34
12.6 Start program
Requirement:A program is set.
→ "Setting the program", page 33
On
press.
▶
aThe display shows the program
duration or the program end time. aThe
display shows according to program
mende: "End" .
A notice:If "Hot" appears, the device
is cooling the laundry. When "Hot"
goes out, the laundry has cooled
down.
12.7 Add laundry
After the program starts, you can
remove or add laundry at any time.
On
press.
1.
The cooling process starts
automatically after about 30
seconds and cools the laundry
while the drum rotates. If you want
to avoid or cancel the cooling
process, open the door.
→ "Display", page 22
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
On
press.
5.

12.8 Cancel program

On
press.
1.
Open the door.
2.
Remove the laundry.
3.
→ ""Removing laundry", page 34
12.9 Remove laundry
Open the door.
1.
Take the laundry out of the drum.
2.