Table of Contents
Advertisement
Disturbance
Drying time is too
long.
Water is leaking out.
Laundry is too damp.
Cause and troubleshooting
Ambient temperature is lower than 15°C.
Make sure the ambient temperature is above 15°C.
▶
Insufficient air circulation where the device is
installed.
▶
Ventilate the installation location of the device.
The ventilation opening of the device is blocked.
Make sure that the ventilation opening of the
▶
device is kept clear.
Heat exchanger is contaminated.
▶
Carry out simple device maintenance on the device.
→ "Device care", page 43
Device is not aligned correctly.
→
▶
"Aligning the device", page 16
Water drain hose is not connected correctly.
Make sure the water drain hose is connected
▶
correctly.
→ "Connecting the water drain hose", page 14
Unsuitable program set for the textile type.
Set a time program for drying.
▶
→ "Programs", page 29
Power supply has failed.
Check whether the room lights or other devices in
▶
the room are working.
Load quantity is too high.
Please note the maximum load capacity of the
▶
→ "Programs", page 29 .
Warm laundry feels damper than it actually is at the end of
the program.
Remove the laundry from the drum immediately after
1.
drying.
Spread the laundry items out to cool.
2.
Unsuitable drying target set.
→
"Change drying target", page 28 .
▶
Dry target not adjusted.
→ "Adjust drying target", page 28 .
▶
Load quantity too low.
Troubleshootingde
51
Advertisement
Table of Contents
