Table of Contents
Advertisement
14.10 Data Protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the Home Connect®
server (initial registration):
¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
¡ Security certificate of the Wi-Fi communication module
(to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect®
functions for use and is only required when you want to
use the Home Connect® functions for the first time.
Note: Please note that the Home Connect® functions can
be utilized only with the Home Connect® app. Information
on data protection can be called up in the Home Connect®
app.
15 Basic settings
Basic settings
You can configure the basic settings for your appliance to
Basic settings
meet your needs.
Note: You can also adjust the the basic settings in the
Home Connect® app.
15.1 Overview of the basic settings
Program selector with program positions
Set the volume of the signal tone that is emitted
1
when the program ends:
0 (off) to 4 (very loud)
Set the volume of the signal tone that is emitted
2
when the buttons are selected:
0 (off) to 4 (very loud)
Set the display brightness:
3
1 (low) to 4 (very high)
Adjust the dryness level → Page 23 :
4
0 (dry) to 3 (driest)
Start the basic (CP1) or intensive (CP2) appliance
5
care program.
→ "Appliance care", Page 25
Display the number of started programs.
6
Restore the appliance to the factory settings (rES).
7
15.2 Changing the basic settings
To call up the basic settings, press Basic Settings.
1.
Use the program selector to select the required basic
2.
setting. → Page 25
Adjust the basic setting:
3.
To change the value, press
‒
To reset the appliance to the factory settings, press
‒
and hold
Press Basic Settings to save the settings.
4.
Appliance care
16 Appliance care
The appliance offers cleaning programs for basic and
Appliance care
intensive appliance care.
16.1 Preparing for the appliance care
program
Preparing the appliance for the appliance care
program
Prepare the appliance before running the appliance care
program.
1
Requirements
2
¡ The drum is empty.
¡ The appliance is in standby mode.
3
Clean the lint screen. → Page 20
1.
Pull out the condensation container horizontally and
4
2.
empty it. → Page 22
5
Preparing the condensation container for the
6
appliance care program
If you are draining the condensation water from the
7
appliance using the drain hose, prepare the condensation
container before running the appliance care program.
Basic settings en-us
or
for approx. 3 seconds.
.
25
Advertisement
Table of Contents
