Table of Contents
Advertisement
NLDevice maintenance
14.2 Changing basic settings
Set the program selector to
1.
position 1.
PressIron dryand at the same time
2.
turn the program selector to
position 2.
aThe display shows the current value
the on.
Set the program selector to the
3.
desired position.
→ "Overview of the basic settings",
page 33
PressReady into change the value.
4.
Turn off the device to save the
5.
change.
15 Device maintenance
15.1 Preparing the device for
device maintenance
drive
Before carrying out simple or
intensive device maintenance, the
device must be prepared.
reid.
Required:The fluff
finish.
→ "Clean fluff filter
34
lter is
n", Page 29 .
Remove the laundry.
1.
Close the appliance door.
2.
Pull out the condensed water
3.
container horizontally.
Emptying the condensed water container
4.
→ Page 31 .
Advertisement
Table of Contents
