Table of Contents
Advertisement
Quick Links
Trademarks
Copyright © PLANET Technology Corp. 2003.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trade-
marks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa-
tion, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User's Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re-
sponsibility for any inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the information
in this User's Manual, and reserves the right to make improvements to this
User's Manual and/or to the products described in this User's Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incom-
plete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Revision
PLANET Gigabit Ethernet Switch User's Manual
FOR MODELS: GSW-1600/GSW-2400
Part No.: EM-GSW24_16v1
Advertisement
Table of Contents
Related Manuals for Planet GSW-1600
Summary of Contents for Planet GSW-1600
-
Page 1: Fcc Warning
Trademarks Copyright © PLANET Technology Corp. 2003. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trade- marks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in... -
Page 2: Table Of Contents
1.1 Package Contents 1.2 How to Use This Manual 1.3 Product Features 1.4 Product Specifications Chapter 2 Installation 2.1 Product Description 2.2 Installing a GSW-1600/2400 Chapter 3 Switch Operation 3.1 Address Table 3.2 Learning 3.3 Forwarding & Filtering 3.4 Store-and-Forward 3.5 Auto-Negotiation... -
Page 3: Chapter 1 Introduction
1.2 How to Use This Manual This Gigabit Ethernet Switch User Manual is structured as follows: • Section 2. Installation It explains the functions of GSW-1600/2400 and how to physically install the GSW-1600/2400. • Section 3. Switch operation It contains specifications of GSW-1600/2400. -
Page 4: Product Features
1.3 Product Features • Complies with IEEE802.3, 10Base-T, IEEE802.3u, 100Base-TX IEEE802.3ab, 1000Base-T • 16/24-port 10/100/1000 Mbps Ethernet ports and 2 Mini-GBIC interface for GSW-2400 • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation •... -
Page 5: Product Specifications
1.4 Product Specifications Model GSW-1600 GSW-2400 Hardware Specification Network ports Mini-GBIC interface * 2, shared with port 12/24 Switch architecture Store-and-Forward Switch Fabric 32Gbps 44Gbps Switch throughput 23.8Mpps 38.6Mpps Address Table 4K entries 32K entries Share data Buffer 272KB Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame... -
Page 7: Chapter 2 Installation
The PLANET GSW-1600/GSW-2400 is a 16/24-port 10/100/1000Mbps Ethernet switch with non-blocking wire-speed performance. With 32/44Gbps internal switching fabric, the GSW-1600/GSW-2400 can handle extremely large amounts of data transmission in a secure topology linking to a backbone or high-power servers. The GSW-1600 /GSW-2400 could recognize up to 4K/32K MAC Address table and provides 272 KB /2MB on-chip frame buffer. - Page 8 2.1.3 LED Indicators Color Function Green Lights to indicate that the Switch has power. Over Heat *1 Lights to indicate that the Switch exceeds its opera- (GSW-2400 tional temperature. only) Fan Failure *2 Lights to indicate that the fans are not active. (GSW-2400 only) Color...
-
Page 9: Installing A Gsw-1600/2400
2.2.1 Desktop Installation To install a GSW-1600/2400 on a desktop or shelf, simply complete the following steps: Step1: Attach the rubber feet to the recessed areas on the bottom of the switch. Step2: Place the GSW-1600/2400 on a desktop or shelf near an AC power source. - Page 10 Step5: Supply power to the Switch. A. Connect one end of the power cable to the GSW-1600/2400. B. Connect the power plug of the power cable to a standard wall outlet. When the GSW-1600/2400 receives power, the Power LED should remain solid Green.
-
Page 11: Chapter 3 Switch Operation
Chapter 3 SWITCH OPERATION 3.1 Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning process of Ethernet Switch. -
Page 12: Auto-Negotiation
The Switch performs “Store and forward” therefore, no error packets occur. More reliably, it reduces the re-transmission rate. No packet loss will occur. 3.5 Auto-Negotiation The STP ports on the Switch have built-in “Auto-negotiation”. This technology automatically sets the best possible bandwidth when a connection is established with another network device (usually at Power On or Reset). -
Page 13: Chapter 4 Troubleshooting
Chapter 4 TROUBLESHOOTING This chapter contains information to help you solve problems. If Giga Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and its quality. -
Page 15: Appendix A
APPENDIX A A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard. - Page 18 Part No.:EM-GSW24_16v1...