Advertisement
DIP Switch
The front panel of Gigabit Ethernet Switch provides one DIP switch for
"Standard", "VLAN", "Port Trunk" and "Flow Control Off" mode
selections. The detailed descriptions are shown in the following table.
DIP Switch
Mode
This mode makes the Gigabit Ethernet Switch operate as a
Standard
general switch and all ports operate at 10/100/1000Mbps auto-
(default)
negotiation.
This mode makes the
GSW-1601 operate as a VLAN
isolation switch and
1. Port 1 to port 14 will isolate
VLAN
respectively.
2. Port 1 to port 14 can only
communicate with port 15
and port 16 (uplink port).
This mode makes the
Port
GSW-1601 operate as a Trunk
Trunk
switch with port 15 and port
16 as a set of trunk ports.
Flow
This mode disables the Gigabit Ethernet Switch flow control
Control
function.
Off
Change the DIP switch setting and the Gigabit Ethernet Switch
must power off/power on to take effect.
Function
This mode makes the
GSW-2401 operate as a VLAN
isolation switch and
1. Port 1 to port 22 will isolate
respectively.
2. Port 1 to port 22 can only
communicate with port 23
and port 24 (uplink port).
This mode makes the
GSW-2401 operate as a Trunk
switch with port 23 and port
24 as a set of trunk ports.
7
Advertisement
