Daikin Maverick I Installation And Maintenance Manual page 66

Standalone with Building Automation System
If Occupied Mode is set to any of the options other than "Off"
and "Control By Thermostat", the control will operate in Stand
Alone mode or network using its local temperature sensors to
Figure 5: Zone Sensor with Building Automation System
Zone Sensor
10k Thermistor
Override
2k
Button
5k
10k Pot
Setpoint Adj.
McQuay OM 1077
determine demand. The system can be set up with a zone
sensor, 910108514 or 910108214 communication card, and
2nd party building automation system that will be controlled
from a central location.
BACnet Daughter Board
Unit Installation
LONWorks Daughter Board
11