Program Scan - Kenwood TH-G71A Instruction Manual

PROGRAM SCAN
Program Scan is similar to VFO Scan except that you
select the frequency range of the scan.
Po IG
P 1YS508 7 ,
6300
4539}
Gs
m@ Setting Scan Limits
You can store up to 10 scan ranges in memory
7
2
channels LO/UO to L9/U9.
Select the desired band.
Turn the Tuning control to display the desired
lower limit.
Press [F].
Turn the Tuning control to select a channel in the
range LO to LY.
10
Press [MR].
e The lower limit is stored in the channel.
Turn the Tuning control to display the desired
upper limit.
Press [F].
Turn the Tuning control to select a matching
channel in the range U0 to U9.
e If you have selected for example L3 in step 4,
select U3.
Press [MR].
¢ The upper limit is stored in the channel.
To confirm the stored scan limits, press [MR], then
select the L and U channels.
Note:
ad
a4
The lower limit must be lower in frequency than the upper limit.
The lower and upper frequency steps must be equal.
@ The lower and upper limits must be selected on the same band.