Program Scan - Kenwood TS-890S Instruction Manual

2 NAMES AND FUNCTIONS OF PARTS
List of Function Key Behaviors (Standard Mode Screen)
Function Keys (Vertically Arrayed)
Key Guide
Press
[ANT/PRE]
Press and
hold
Press
[ATT]
Press and
hold
Press
[RX EQ]
Press and
hold
F Press
[TX EQ]
Press and
hold
Press
[MAX-Po]
Press and
hold
[METER] Press
Press
[PROC]
Press and
hold
Function Keys (Horizontally Arrayed)
Key Guide
F1 [RX PLAY] Press
[TX MSG] Press
F2
[KEYER] Press
F3 [DECODE] Press
Press
F4 [TONE]
Press and
hold
Press
F5 [SCAN]
Press and
hold
F6 Press
[M VFO]
F7 [M.LIST] Press
2-4
Switches the preamplifier. (OFF/ PRE 1/ PRE 2)
Switches between "ANT 1" and "ANT 2".
Switches the attenuation level of the attenuator. (OFF/ 6 dB/ 12 dB/ 18 dB)
Switches in the reverse order.
Turns ON/OFF the RX equalizer.
Displays the RX equalizer configuration screen.
Turns ON/OFF the TX equalizer.
Displays the TX equalizer configuration screen.
Turns ON/OFF the TX output power limiter.
Displays the TX output power limiter configuration screen.
Switches the meter display.
Turns ON/OFF the speech processor.
Displays the Speech Processor configuration screen.
Displays the audio recording file screen.
Displays the voice message screen. (Displayed in the SSB, AM and FM modes.)
Displays the CW message screen. (Displayed in the CW mode.)
Displays the communication screen. (Displayed in the CW, FSK and PSK modes.)
Switches in the sequence of: "TONE" → "CTCSS" → "CROSS TONE". (Displayed in the FM mode.)
Displays the TONE frequency, CTCSS frequency or cross tone configuration screen.
Starts/stops scanning.
Displays the VFO/Program Scan segment screen. (Displayed in the VFO mode.)
Displays the memory scan group screen. (Displayed in the memory channel mode.)
Shifts the memory.
(Displayed in the memory channel and quick memory channel modes.)
Displays the memory channel list.
Behavior
Behavior
Refer to
5-6
4-10
6-1
6-1
5-4
5-4
8-5
8-5
4-8
4-8
4-8
8-3
8-3
Refer to
12-4
12-1
5-14
5-10
5-22
5-22
5-28
5-30
5-30
10-1
10-3
10-1
10-3
9-3
9-6
9-1