Kenwood TH-G71A Instruction Manual page 20

@ Activating Tone Function 4 Turn the Tuning control to select a tone
: frequency.
1 Select the desired band.
: : 5 Press any key other than [LAMP] and [MONI] to
2 Press [F], [LOW] to switch the Tone function ON complete the setting.
(or OFF).
simultaneously. Switching the Tone function ON after activating the
CTCSS deactivates the CTCSS.
TH-G71TE only: When you access repeaters that require 1750 Hz
tones, you need not activate the Tone function. No matter which
selection you make here, pressing [LOW] while pressing the PTT
switch or simply pressing [LOW] causes the transceiver to transmit
1750 Hz tones.
| @| Note: You cannot use the Tone and CTCSS functions
m Selecting a Tone Frequency
1 Select the desired band.
2 Press [F], [LOW] to activate the Tone function. TH-G71E only: To transmit 1750 Hz tones, press and hold the PTT
« The current tone frequency appears and blinks.