Recalling Test Results - Lifescan ONE TOUCH BASIC Owner's Booklet

LSI-99-183/OTB OB/rev.02A
If you are using the meter for the
very first time and have not used it
for testing, or if you have used a
software program to clear the meter's
memory, the following message will
appear, indicating that there are no
results stored in the memory:

Recalling Test Results

Pressing the M button allows you to
see each blood glucose, check strip,
and control solution test stored in
memory. The records will appear
10/11/99 9:18 AM Page 46
in order from the most recent to
the oldest, up to the full 75-record
capacity of the memory. Test results
will appear on the meter display
as follows:
When the memory returns to the most
recent result, the meter will beep (if
the Beep option is set to
can exit the memory mode at any
time by pressing the on/off button.
46
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00713 - U.S. Patent No. 8,840,635
(Examples)
). You
LifeScan, Inc.. Ex. 1110 - Page 54