Lifescan ONE TOUCH BASIC Owner's Booklet page 45

LSI-99-183/OTB OB/rev.02A
Step 3: Accurate Results in
45 Seconds.
The meter then
counts down from
45 to 0 seconds,
beeps (if the Beep
option is set to
), and displays
your result. Remove
the test strip only
after the result is displayed.
Blood glucose test results are auto-
matically stored in your meter's
memory with the time and date
they were performed. If you have
chosen to turn the Clock option
to , your test results will
10/11/99 9:18 AM Page 37
appear without time and date.
(See page 49.)
Note: The meter records the time
and date of each test even when
the Clock option is set to
M C
They can once again be seen
by turning the Clock option
to
(Example)
Note: The first time you enter
the set-up mode, the meter will
automatically display the time as
Pacific standard time (PST) when
the Clock option is set to
If you do not reset the time, the
meter will accurately record each
test result using PST.
37
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00713 - U.S. Patent No. 8,840,635
.
LifeScan, Inc.. Ex. 1110 - Page 45
.
.