Lifescan ONE TOUCH BASIC Owner's Booklet page 24

LSI-99-183/OTB OB/rev.02A
Step 2: When apply sample
Appears, Remove the Check Strip
from the Test Strip Holder.
Note: This is the only time you
should remove a strip during
a test.
Note: Do not apply control
solution to the check strip.
M
10/11/99 9:18 AM
Step 3: When insert side 2
Appears, Turn the Check Strip
Over and Slide It Back into the
Test Strip Holder.
It should go in notched end first,
Side 2 (white side) facing up. The
meter counts down from four to
zero and then gives you a check
strip result.
C
1
16
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00713 - U.S. Patent No. 8,840,635
Page 16
M C
2
LifeScan, Inc.. Ex. 1110 - Page 24