Lifescan ONE TOUCH BASIC Owner's Booklet page 20

LSI-99-183/OTB OB/rev.02A
Step 1: Press the On/Off Button.
When turning meter on, all display
symbols will appear. The last test
result will then appear on the
display for a moment. (If using the
meter for the first time, the message
code-- will appear on the display.)
If you have already coded the meter,
your current test strip code followed
by the message check code will
momentarily appear on the display.
The following will then appear:
(Example)
10/11/99 9:18 AM Page 12
Step 2: Match the Code Numbers.
The code number on the test strip
vial ranges from 1 to 16. If the code
number on the meter display match-
es the code number on the test strip
vial, you can begin testing. If the two
code numbers do not match, follow
Step 3. (When you first use the meter,
code-- will appear, showing that
there is no code stored in the memory.)
12
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00713 - U.S. Patent No. 8,840,635
LifeScan, Inc.. Ex. 1110 - Page 20