Kenwood TM-241A Instruction Manual page 44

Calling all station in the group
1. To са! all station in the group, select the memory
number in which the group code is stored. In this
example, the number ts stored in number P3.
2. Press the PTT key once or press a key other than
DR/DT or MR/M to display the frequency again.
3. Press the PTT switch.
145.660M Hz
189*111
45558 P3
NELLE LLLI ii
Group code 789 and your station ID code 111 are
transmitted. A DTMF tone sounds is heard during
transmitting.
44
Calling a specific station(Example: Call station 3.)
To call a specific station (for example, station O. 3), use
the following procedure: |
1. Select the memory in which the local station code is
stored (in this example, select memory P2.) or Enter
the individual! code of the local station in memory O.
2. Press the PTT key once or press a key other than
DR/DT or MR/M to display the frequency again.
3. Press the PTT switch.
145.660M Hz
444*111
Local station code 444 and your station ID code 111 are
transmitted. A DTMF tone sounds is heard during
transmitting.