Kenwood TM-241A Instruction Manual page 34

5-9 DRS (Digital Recording System)
| OPERATION
The optional DRU-1 (Digital Recording Unit) permits
you to manually or automatically record up to a maxi
mum of 8 different voice messages for later playback.
The automatic recording function works in conjunction
with the T.ALT function.
This function can be used with the DTSS or paging
mode.
Press the F key for longer than 1 second, then press the
DR/DT key while the F indicator is flashing. This opera-
tion will change the modes as follows:
(4. ਤਾ ਤਕ ਤਾ ਤਾ ਤਤ
Normal Mode -» DRS selection - » ОТМЕ control
А mode mode
| |
Ф Normal Mode
No DRS functions active.
@ DRS selection mode
Recording and playback
Selectable tone quality level and or number of
phrases
DRS indicator lights in the display
|
|
|
|
34
"d DTMF control mode
. Automatic Recording
The DRS indicator will flash.
2. The DRS function can be remotely controlled by an
external DTMF signal. The DRS indicator goes on
continuously.
5-9-1 Before Recording
The recording conditions are preset at the factory for
the following settings:
Tone Quality Level 1
Maximum recording phrase 8
Current Recording Phrase number 1 st.
0 : Recording and playback OK. 1: Recording LOCK.
2 : Recording and playback LOCK.
| MAX. Number || Phrase
| of phrases |, number
eu
DRS ,& 4)
Elapsed time
| Tone quality
level