Kenwood TM-241A Instruction Manual page 28

5-5-7 Priority Alert Function
The priority alert function allows you to monitor mem-
function has been activated the microprocessor will
switch the transceiver to the frequency stored in mem-
the transceiver will return to the original frequency. If a
tion:
1. Ensure the frequency you wish to monitor has been
entered into memory channel 1.
2. Adjust the SQL control to the threshold point.
3. Press the F key momen-
tarily, and then press
the SHIFT/AL key. The
AL indicator wil! turn on
in the display to remind
you that this function
has been activated. '
5. To turn this function off repeat step 3. The AL indi-
cator will turn off. |
| Note:
|
During the period memory channel 1 is being scanned you will not |
hear voice communications, only the beep will be heard if a signal is |
present.
28
5-6 REPEATER OPERATIONS
5-6-1 Transmitter Offsets
241Е
TM-441E | TM-541A | TM-541E |
|
|
European : |
| i
version
+600 kHz +1.6MHz +12 MHz | +35 MHz |
—5 MHz |—1.6 MHz; -- 12 ме —6 MHz | —600 kHz
— ана
—7.6 MHz' - 20 MHz
Offset Direction
To select the desired transmitter offset direction press
the SHIFT/AL key. Each time you press the key the
transceiver will advance from one direction to the next,
i.e, "+" to "—'" ("—'' to "'— —" with TM-441Eand TM-
541A) to no offset (simplex).
Automatic Offset Selection (TM-241A U.S.A. version) -
The TM-241A has been programmed according to the
standard ARRL (Amateur Radio Relay League) Band
Plan with regard to transmitter offset direction. Please
see the accompanying chart for addition information
on this programming. You can, of course, override this
by using the SHIFT/AL key if desired.
145.1 145.5 146.0 146.4 146.6 147.0 147.4 147.6 148.0 mE
15 [-151+15[-1+151- [5
nn i
Е simplex