Table of Contents
Advertisement
1 Hardware Installation and Connection
1.1 Preparation Work
DANGER
All the installation and operations here should conform to your local electric safety
rules.
SN
1
2
3
1.2 HDD Installation
DANGER
Shut down the device and then unplug the power cable before you open the case to
replace the HDD!
All figures listed below for reference only!
For the first time to install, please check the HDD has been installed or not.
Refer to the user manual for HDD space information and recommended HDD brand. Please use HDD of
7200rpm or higher. Usually we do not recommend the PC HDD.
Name
Whole
Appearance
package
Package
Front
The model on the front
panel and
panel
rear
The label on the rear
panel
panel.
Case
Appearance
Check the data cable,
power cable, fan cable,
main board and etc.
Contents
There is any visible damage or not.
There is any accidental clash during
transportation or not.
Check the model with the purchase
order.
It is neat and clean or not.
Note
Do not tear off, or discard the label.
Usually we need you to represent the
serial number when we provide the
service after sales.
There is any visible damage or not.
Check the connection is secure or not.
Note
Contact your local retailer or our
service engineer if the connection is
loosen.
1
Advertisement
Table of Contents
