Gui Operation; Boot Up; Device Initialization - Panasonic K-NL408KT/G Quick Start Manual

Hide thumbs Also See for K-NL408KT/G:

Table of Contents

4 GUI Operation

Note

Slight difference may be found on the user interface. All figures listed below for reference only.

DANGER

Before the boot up, please make sure:

For device security, please connect the NVR to the power adapter first and then connect the



device to the power socket.

The rated input voltage matches the device power on-off button. Please make sure the power



wire connection is OK. Then click the power on-off button.

Always use the stable current, if necessary UPS is a best alternative measure.



Please follow the steps listed below to boot up the device.

Step 1 Connect the device to the monitor and then connect a mouse.

Step 2 Connect power cable.

Step 3 Click the power button at the front or rear panel and then boot up the device. After device booted

up, the system is in multiple-channel display mode by default.

If it is your first time to use the device, please set a login password of admin (system default user).

Note

For your device safety, please keep your login password of admin well after the initialization steps, and

change the password regularly.

Please follow the steps listed below.

Step 1 Boot up NVR.

Device displays device initialization interface. See Figure 4-1.

Table of Contents