Panasonic K-NL408KT/G Quick Start Manual page 7

①Use the screwdriver to loose the screws
of the rear panel and then remove the front
cover.
③Connect to the HDD data cable to the main
board and the HDD port respectively. Loosen
the power cable of the chassis and connect
another end of the power cable to the HDD
port.
②Put the HDD to the HDD bracket in
the chassis and then line up the four
screws to the four holes in the HDD.
Use the screwdriver to fix the screws
firmly to secure HDD on the HDD
bracket
④After connect the cable, put the front
cover back to the device and then fix
screws of the rear panel.
2