Panasonic K-NL408KT/G Quick Start Manual page 20

Step 2 Add network camera.
Device search: Click the button; you can search all network cameras in the same network

segment. See Figure 4-9. Double click a camera or check the camera box and then click Add
button, you can add a device to the list.
Note
 The device in the added device list is not shown in the search result column.
 In
input the corresponding information, click Search button to view the results.
 Status in the search list can display the remote device has been initialized or not. That is to
say, the remote device has set the password of admin.
initialized. Cherck Uninitialized box to search the unitialized devices. Refer to the user's
manual for detailed informaiton.
Manual Add: Click Manual Add button, you can set the corresponding network camera

information and then select the channel you want to add. See Figure 4-10.
Manufacturer: Please select from the dropdown list.

, select IP address or the MAC address from the dropdown list and then
Figure 4-9
15
means the remote device has