Table of Contents
Advertisement
Device Display
Does Not
Show Correct/
Readable Info
Blank Display
Keypad Does
Not Respond
Transactions
Fail to Process
Checking
Magnetic Card
Reader
Checking Smart
Card Reader
If the device display does not show correct/readable info:
•
Check all cable connections. If the problem persists, contact your local Verifone
representative for assistance.
When the device display is blank:
•
If the device display is dark, tap the screen with the stylus or your finger. If the
unit was in screen-saver mode, the screen will turn on when touched.
•
If the display does not show correct or readable information, check all cable
connections. If the problem persists, contact your local Verifone representative
for assistance.
If the keypad does not respond properly:
•
Check the device display. If it displays the wrong character or nothing at all
when you press a key, follow the steps outlined in
•
Refer to the user documentation for that application if pressing a function key
does not perform the expected action to ensure you are entering data
correctly.
•
Contact your local Verifone representative if the problem persists.
There are several possible reasons why the unit may not be processing
transactions. Use the following steps to troubleshoot failures.
To check magnetic card reader:
1
Perform a test transaction using one or more different magnetic stripe cards to
ensure the problem is not a defective card.
2
Ensure that you are swiping cards properly.
3
Process a transaction manually using the keypad instead of the card reader. If
the manual transaction works, the problem may be a defective card reader.
4
Contact your local Verifone representative if the problem persists.
To check smart card reader:
1
Perform a test transaction using several different smart cards to ensure the
problem is not a defective card.
2
Ensure that the card is inserted correctly.
Installation Guide
IX90 M440
Transactions Fail to Process
© VeriFone Inc. All rights Reserved.
.
33
Advertisement
Table of Contents
