Device Does Not Start - VeriFone IX90 M440 Installation Manual

6. Troubleshooting Guidelines
Device Does
Not Start
The troubleshooting guidelines provided in the following section are to
assist you to successfully install and configure your IX90. If you have
problems operating your IX90, please read through these troubleshooting
examples.
If the problem persists even after performing the outlined guidelines or if the
problem is not described below, contact your local Verifone representative
for assistance. Typical examples of malfunction you may encounter while
operating your IX90 and steps you can take to resolve them are listed.
The IX90 comes equipped with tamper-evident labels. The IX90 contains no user
serviceable parts. Do not, under any circumstances, attempt to disassemble the
unit. Perform only those adjustments or repairs specified in this guide. For all other
services, contact your local Verifone service provider. Service conducted by
parties other than authorized Verifone representatives may void any warranty.
If the LAN connection to your IO Hub is removed during usage, then the
merchant facing device will require a restart to switch the network to Wi-Fi and
establish connection.
Using an incorrectly rated power source can damage the unit or cause it to
malfunction.
See Specifications for power source information.
L'utilisation d'une source d'alimentation mal évaluée peut endommager
l'appareil ou provoquer un dysfonctionnement.
Voir Spécifications pour plus d'informations sur la source d'alimentation.
If the device does not start:
•
Ensure that the device is plugged into a dedicated power source.
•
Check power cable connector is plugged in properly.
Installation Guide IX90 M440
32
© VeriFone Inc. All rights Reserved.