Operating Controls And Adjustments; Start/Stop Switch; Fence Operation - Delta DJ-15 Instruction Manual

Hide thumbs Also See for DJ-15:

Table of Contents

OPERATING CONTROLS AND ADJUSTMENTS

START/STOP SWITCH

n --

The stait/slop switch is mounted on the Jointer stand panel

for easy accessibility. To start the machine, simply press

the start button (A) Fig 15; to stop the machine, press the

stop button (B).

FENCE OPERATION

I he fence can be moved across the table by loosening lock

lever (A) Fig 16. sliding the fence (B) to the desired position

and retightening locking lever (A). As the fence is moved

across the table, the sliding bracket (C) guards the

cutterhead in back of the fence as shown.

To tilt the fence to the right or left, loosen handle <Q) Fig. 17.

pull out and turn plunger (E), and move the fence tilting

lever (F) to obtain the desired angle ot tilt: relighten locking

handle (D)

NOTE: The handle (D) Fig. 17, is spring

loaded, and can be repositioned by pulling out the handle

and repositioning it on the serrated nut located underneath

the handle.

IMPORTANT: When cutting a bevel, we suggest that

whenever possible, the fence be lilted toward the table as

shown in Fig. 18. The fence will then form a V-shape with

the tables and the work is easily pressed into the pocket

while passing arross the knives.

Table of Contents