Operating Controls And Adjustments; Starting And Stopping The Shaper; Locking Switch In The "Off" Position - Delta 43-424 Instruction Manual

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND STOPPING THE SHAPER

To apply power to the machine, push "ON" button (A) Fig. 43. To stop the machine,
push "OFF" button (B).

LOCKING SWITCH IN THE "OFF" POSITION

IMPORTANT: We suggest that when the shaper is not in use, the switch be locked
in the "OFF" position using a padlock (C) Fig. 44 , through the switch plate and "ON"
button as shown.
Fig. 43
Fig. 44
16
A
B
C