Ricoh AFICIO A267 Service Manual page 182

20 September 1999
Mode No.
Class Class
1 and 2 3
4th Bottom Plate
Pressure
Re-adjustment
(Middle Size)
(Optional PFU)
5
4th Paper Amount
(Small Size)
6
(Optional PFU)
1-911*
4th Paper Amount
(Middle Size)
7
(Optional PFU)
4th Small Paper
Size Setting
(Optional PFU)
8
4th Middle Paper
Size Setting
(Optional PFU)
9
Tray Motor Reverse
Time
1-912*
Duplex Inverter
Motor Speed
Adjustment
1-920* 1
(Forward/Low)
Function
Adjusts the upper paper lift motor forward
rotation time for paper sizes larger than the
small size threshold set with SP1-911-8, up
to and including the middle size threshold
set with SP1-911-9.
The motor rotates forward when the
remaining paper amount is lower than the
value of SP1-911-7.
If a middle size threshold is not stored with
SP1-911-9, this SP is not used.
Use this SP when a paper feed problem
occurs when paper in the 4th paper tray is
running low.
See "Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-911.
Selects the remaining paper amount limit for
use with SP1-911-4.
Set this SP to 2 or 3 when a paper feed
problem occurs before near-end.
See "Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-911.
Selects the remaining paper amount limit for
use with SP1-911-5.
Set this SP to 2 or 3 when a paper feed
problem occurs before near-end.
See "Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-911.
Selects the small size threshold for the 4th
paper tray.
"0" means that this setting is not used.
The size used by SP1-911 is determined by
paper width. See "Optional Paper Tray Unit -
Paper Lift Mechanism" for details on SP1-
911.
Selects the middle size threshold for the
upper tray.
"0" means that this setting is not used.
The value must be larger than the small size
threshold (SP1-911-8). The size used by
SP1-911 is determined by paper width. See
"Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-911.
Adjusts the tray motor reverse time.
The tray motor reverses when the tray is
pulled out. The tray can be put back in the
machine without damage while the motor
reverses.
Adjusts the duplex inverter motor speed
during forward rotation at low speed.
Use this SP when paper often jams at the
duplex entrance area. Do not use in the field
unless directed by service centre staff.
4-15
SERVICE PROGRAM MODE
Settings
0 ~ 2000
1 ms/step
300 ms
0: None
(Empty)
1: Near End
2: 25%
3: 75%
0: None
(Empty)
1: Near End
2: 25%
3: 75%
0: None
(Not used)
1: HLT/A5
2: A4
3: LT
4: DLT
5: A3
0: None
(Not used)
1: HLT/A5
2: A4
3: LT
4: DLT
5: A3
0 ~ 9000
1 ms/step
1700 ms
-4 ~ 4
1/step
0