20 September 1999
6.1.7 SCANNER WIRES
[A]
1. Remove the exposure glass, operation panel, and all scanner exterior covers.
(See Exposure Glass and Scanner Exterior/Operation Panel.)
2. Remove the left upper stay. (See Exposure Lamp.)
3. Remove the front frame. (See Exposure Lamp.)
4. Remove the rear bracket. (See Exposure Lamp.)
5. Remove the rear frame. (See Exposure Lamp.)
6. Remove the lens cover. (See Lens Block Assembly.)
7. Remove the lens block assembly. (See Lens Block Assembly.)
8. Remove the front and rear scanner wire pins [A]. Then, remove the 1st
scanner.
A267R012.WMF
6-7
SCANNER UNIT