Ricoh AFICIO A267 Service Manual page 175

SERVICE PROGRAM MODE
Mode No.
Class Class
1 and 2 3
1st Bottom Plate
Pressure Adjustment
(Normal Size)
1
1st Bottom Plate
Pressure Adjustment
(Small Size)
2
1-908*
1st Bottom Plate
Pressure Adjustment
(Middle Size)
3
1st Bottom Plate
Pressure
Re-adjustment
(Small Size)
4
Function
If a middle size threshold is not stored with
SP1-908-9, this SP adjusts the upper paper
lift motor reverse time for paper sizes larger
than the small size threshold set with
SP1-908-8.
If a middle size threshold is stored with SP1-
908-9, then this SP adjusts the motor
reverse time for sizes larger than the middle
size.
Do not input a value greater than 1200.
Use this SP when a paper feed problem
occurs from the 1st paper tray.
See "Paper Lift Mechanism" for details on
SP1-908.
Adjusts the upper paper lift motor reverse
time for paper of the same size as or smaller
than the small size threshold set with SP1-
908-8.
Do not input a value greater than 1200.
Use this SP when a paper feed problem
occurs from the 1st paper tray.
See "Paper Lift Mechanism" for details on
SP1-908.
Adjusts the upper paper lift motor reverse
time for paper sizes larger than the small
size threshold set with SP1-908-8, up to and
including the middle size threshold set with
SP1-908-9. If a middle size threshold is not
stored with SP1-908-9, this SP is not used.
Do not input a value greater than 1200.
Use this SP when a paper feed problem
occurs from the 1st paper tray.
See "Paper Lift Mechanism" for details on
SP1-908.
Adjusts the upper paper lift motor forward
rotation time for paper of the same size as
or smaller than the small size threshold set
with SP1-908-8. The motor rotates forward
when the remaining paper amount is lower
than the value of SP1-908-6.
Use this SP when a paper feed problem
occurs when paper in the 1st paper tray is
running low.
See "Paper Lift Mechanism" for details on
SP1-908.
4-8
20 September 1999
Settings
0 ~ 2000
1 ms/step
200 ms
0 ~ 2000
1 ms/step
600 ms
0 ~ 2000
1 ms/step
200 ms
0 ~ 2000
1 ms/step
400 ms